PE Foam Pipe Insulation Plant Available in Southwest USA - Ref # 1INNO

• Complete Technology Package Avaiable
• Turnkey Startup Package Available

Includes the following equipment:

• (1) Gloucester Engineering 4.5" X 6" Foam Line
• (1) Gloucester Engineering 3.5" X 4.5" Foam Line
• (1) 90MM 48:1 Foam Extruder
• Die Heads and All Downstream Equipment Included
• Butane Sensing & Safety Equipment Included

Products:

• PE Pipe Insulation up to 4.5"
• 1000 - 1200PPH @ 1.6 to 1.8 PCF

Terms of Sale:

• Equipment Sold as is where is Southwest USA
• Customer Responsible for Disassembly and Loading
• 25% Deposit Required Upon Placement of Order
• Net Payment before Equipment Removal
• Inspection while under Power Available
• Training and Startup Assistance Available at a Separate Cost

Foam Plank Manufacturing Line Ref #1PLK

• Production Rate of 20-24 Planks per hour
• 2" Thickness X 24" finished width X 108" finished length
• Density Range: 1.5 to 2.2 lbs./3ft

Equipment Included:

• 3" Diameter NRM PE Foam Extruder
• 48: 1 L/D
• Control System
• Heat Exchanger System
• 75 HP Drive
• Accumulator Assembly with First In / First Out Piston Design
• PE Plank Curved Face Die with Hydraulically Operated Gate
• Heated Cross Over Coupling between Extruder & Accumulator

4 Component Blending & Feeding System for:

• Virgin Resin
• Reclaim Resin
• Color
• Additive
• Hydraulic Unit for Accumulator & Automatic Die Shut Off Gate
• GMS (Aging Modifier) Heating & Pumping System with Mass Flowmeter & Controls
• Belted Foam Plank Conveyor Table with Alligator Entry Rolls, Variable Speed Drive and Digital Readout
• Edge Trim Saw System for Trimming Plank to Widths from 23" to 26"
• Cut to Length Table Capable of Cutting Length 100" to 112"
• Cooling Racks Capable of holding at least 16 Planks for stabilizing & cooling
• Butane Metering System is included but is a very basic system that will need some updates