1999 Engel 330 Ton 20.8 Oz Tiebarless Machine
(Can be upgraded to 23.8 or 33.7 Oz)
Model ES 1350/330 TL with CC 100 A03
Reference Number: 1172-2-2
Color:
Light Blue
Size: 330 ton
Shot Size:
20.8 Oz/55 mm (Can
be upgraded to 23.8 or 33.7 Oz)
Platen Size:
1200 x 1200 mm (Oversized Platens/Drop area 850 mm)
Controls: CC 100 A03 EL Closed Loop Control
Clamp Type: Hydraulic Tiebarless
Stroke: 33.5"
Daylight: 13.78" - 47.24"
Max Injection Pressure: 23,751
Voltage: 480/3/60
Dimensions: 273" x 83" x 101"
Weight: 35,000 lbs Clamp/13,000 lbs Injection
Hours:
To advise
Location: Midwest
Options:
This machine is loaded with options.
Servo valve on injection unit, Waterflow controls, Closed loop feed throat control, Single
core pull on the moving platen,
(20 Air blows, Independent pressure control on cores,2 Extra heat zones with
2 extra 8 zone heat cards,
Xaloy 102 Bi-metallic barrel, Increased drive for
improved plasticizing, Independent ejector and core pull, Melt temperture
monitor & thermocouple, Alarm bell with reset, Moving platen support with
linera bearings, No motion key switch, Alarm bell, Power capacitors, Amp
meters on barrel, (7) 120/1/60 @15 Amp duplex outlets,
(2) 460 Outlet @ 20 amp, 230 Outlet @ 15 amp,SPI
Communications to auxiliary, SPI Robot interface, Micrograph plus, Microplast, QDP, PD Graphics,
Interface to host computer,
Terms: 25% with written PO to secure equipment, cashiers check or wire transfer on balance prior to shipment
Price: E-mail or call
Comments: We believe these specifications to be correct, however, they cannot be guaranteed, and we invite your inspection.