Manufacturer: ENGEL
Model: ES 200/55 AH
Color: Dark Green
Reference #:2606/55/94-071604
Year of Manufacture: 1994
Clamp Capacity/Type: 55 Ton Hydraulic
Shot Capacity: 1.23 Oz/22 mm
Tie Bar Spacing: 12.01 x 12.01
Platen Size: 16.93 x 16.93
Maximum Daylight: 18.9
Clamp Stroke: 12.99
Min/Max Mold Height: 5.91/18.9
Control Type/Voltage: EC 88 M A02/Closed Loop Microprocessor/460 Volt
Location: Southern California
Condition: Excellent - Operating in Clean Room Proprietary Manufacturer
Hours Run: Approximately 39,356
Optional Features: (Machine is set up also to mold
thermoplastic/need new screw and barrel), Hydraulic KO, Quick Mold Change
System, Xaloy barrel
& D2 Screw for LIM with Pneumatic Shut Off Nozzle, Single core pull,
Filtroil, Air blow, Alarm bell, Powered safety gate, Level 2 software,
Microplast/Microflow, Micrograph, QDS, PD Graphics and reports, Robot
interface, Auxiliary equipment is powered thru press with outlets on
machine for each, SPI Interface to auxiliary, (2) Additional heat zones
Terms: 1/3 with written PO
to secure equipment, cashiers check prior to shipment on balance.
Price: $27,000 ($114,000 new) SOLD
Comments: We believe these
specifications to be correct, however, they cannot be
guaranteed, and we invite your inspection.
