2002 Engel 200 Ton Vertical Rotary
6.9 Cubic Inch with 30mm Rubber Screw & Barrel
with EC 100 Controls
(Can be converted to run LSR or Thermoplastic as well)
Plastic Screw & Barrel Options Available (3.7, 5, 6.5 or 8.3 Oz Options)
Manufacturer: ENGEL
Model: ES 330/200 VHRB Rubber
Color: White/Blue
Ref #: 1002
Year of Manufacture: 2002
Clamp Capacity/Type: 200 Ton Vertical Rotary/Hydraulic Bridge Style
Shot Capacity: 6.9 cu in oz/30 mm @ 30,000 PSI Reciprocating rubber
screw
3.7 Oz/30 mm with
plastics screw & barrel (Can be upgraded to
5, 6.5 or 8.3 Oz)
Table size: 46.46 - 2 Station
Platen Size: 31.89 x 17.72
Daylight
Min/Max: 15.75 - 31.5
Clamp Stroke: 15.75
Control Type/Voltage: EC 100 EL Microprocessor/460 Volt
Location: Midwest
Hours: 2,200
Condition: Excellent
Optional Features: Auto heat zone start up (2 additional devices
can be driven, 8 Extra PID heat zones, 12
Zones total (8 under the table & 4 on moving platen, Extra 8
zone temp card, Engel ERV robot interface, SPI interface to auxiliary
equipment (Capable of 2 mold temp controllers, 1 chiller, 2 dryers, 1
loader & 1 color feeder), Filtroil, Hydraulic
valve gates with accumulator, Rubber molding package: Bi-metallic
barrel with water cooling & thru hardened screw. 4 Heat zones (2 on
the stationary platen & 2 on the moving platen), Program for mold
venting, (3) 20 Amp/460 Volt outlets, Light curtain, Cold pot ITM program,
Pneumatic shut-off nozzle, 6L
Silicone stuffer with additional water heating circuit with
additional pump and closed loop thru control, Vacuum device complete 25
M3/h with software & electrics, Vacuum gauge with software &
vacuum switch, Preparation for brush system, Special software for purging
capability with clamp open.
Terms: 25% with written PO to secure equipment, wire transfer prior to shipment on balance.
Price:
Call or E-mail ($246,700 new)
Comments: We believe these specifications to be correct, however, they cannot be guaranteed, and we invite your inspection
