Request a quote on stock# 1234| Specification | Description |
|---|---|
| Injection Units | Ferromatik |
| Inj Unit #1 (Model/Screw diameter) | K40/18 mm |
| Inj Unit #2 (Model/Screw diameter) | K40/25 mm |
| Inj Unit #3 (Model/Screw diameter) | K60/30 mm |
| Inj Unit #4 (Model/Screw diameter) | K60/40 mm |
| Connected load | 117 KW |
| Ave energy consumption | 70 KW |
| Blow Molder | |
| Injection mold closing force | 720 KN |
| Blow mold closing force | 180 KN |
| Horizontal stroke of clamping unit | 570 mm |
| Mold opening width | 128 mm |
| Mold closure height | 254 mm |
| Max length of mold holder plate | 750 mm |
| Max width of mold holder plate | 460 mm |
| Barrel heat zones | (8) 6.4 KW |
| Mold heat zones | (14) 49 KW |
| Operating pressure (hydraulic) | 200 bar |
| Operating pressure (pneumatic) | 8 - 10 bar |
| Hydraulic pump rating | 45 KW |
| Voltage: | 460 |
| Total connected load | 118 KW |
| Average consumption | 79 KW |
| Location: | Northeast |
26772 Vista Terrace
Lake Forest, CA 92630-8110
Phone: 949-756-8387
Fax: 949-263-1087
sales@pmexchange.com