300 Ton 2 Shot - 3.7 Oz and .8 Oz with CC 100
Stock Number: 1254
Engel ES 330H/80P/300A Combi US
Age: 2004
Click to view larger photo
Request a quote on stock# 1254
| Specification | Description |
|---|
| Clamp Force: | 300 US Ton |
| Shot Size: | 3.7 Oz/30 mm |
| Primary Inj unit can be upsized to: | 5 Oz/6.5 Oz/8.3 Oz |
| Shot size/2nd inj unit: | .8 Oz/18 mm |
| Secondary Inj Unit can be upsized to: | 1.2 Oz or 1.6 Oz |
| Platen Size: | 35.67" x 35.87" |
| Tie Bar Spacing: | 25.04" x 25.98" |
| Min/Max Daylight: | 7.87" - 49.6" |
| Min/Max Mold Ht: | 7.87" - 25.98" |
| Clamp Stroke: | 23.62" |
| Ejector Stroke: | 7.87" |
| Voltage: | 575 - 460V with transformer |
| Dimensions: | 30' x 8' x 8' |
| Weight: | 35,000 lbs |
| Location: | Midwest |
Equipped With:
CC-100 Closed loop control
Side by side horizontal injection units
Hydraulic rotary table - 35.43" Dia
Mold height 7.87 - 25.20" Min/Max
RC 100 Robot interface
CPM 10V Barrels
CPM9V Thru-hardened screws
Air blow
SS Water flow control
Closed loop feed throat control (both inj units)
Closed loop control via servo valve (both inj units)
Independent ejectors
Closed loop clamp force control
Filtroil
Single core pull
(16) Zone mold heating control (15 amp each)
(2) Extra Temp cards (8 zone each)
Micrograph Plus
Process Data Graphics & Reports
Autoprotect
EMS/Teleservice Interface
26772 Vista Terrace
Lake Forest, CA 92630-8110
Phone: 949-756-8387
Fax: 949-263-1087
sales@pmexchange.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
