Specification | Description |
---|---|
Screw diameter: | 64 mm |
Screw speed max: | 127 min |
Inj capacity: | 386 Cm3/sec |
Inj pressure: | 121 MPa |
Inj rate: | 204.2 cm3/sec |
Inj force: | 389.3 KN |
Screw stroke: | 120 mm |
Nozzle touch force: | 18.5 KN |
Clamping force inj mold: | 490.6 KN |
Preform length below neck: | 160 mm |
Blow mold clamp force: | 297.2 KN |
Machine cooling water volume: | 63.5 L/min |
(Heat exchanger, injection unit, blow mold) | |
Blow mold clamp stroke: | 65 mm |
Blow air pressure: | 3 MPa |
Lip mold stroke: | 17.5 MPa |
AC Servo motor: | 37 KW |
Hydraulic oil volume: | 640 L |
Operation air pressure: | Min 0.96 - Max 0.98 |
Operation air volume: | 460 NL/min |
Heater (Barrel/hot runner): | 23.415/8.41 |
Machine dimensions: | 5.34 x2.10 x 3.41 m |
Machine weight: | 10,700 Kg |
Connected load | 65.8 KW |
Voltage: | 460 |
25422 Trabuco Road, Ste 105 - 531
Lake Forest, CA 92630-2796
Phone: 949-756-8387
Fax: 949-263-1087
sales@pmexchange.com